美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计
美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计 | 时间: January-18 17:47:13 | 分类:其它仪器
凌仪生物专业提供高速离心机，美国Bio-rad伯乐电泳仪，德国eppendorf艾本德移液器，PCR基因扩增仪，雅培原位杂交仪，Thermo热电离心机等实验室仪器设备，要省钱，别错过哦。 
产品描述
Qubit4.0荧光定量仪为全新升级的台式荧光计，配套高灵敏的Qubit定量分析试剂盒，精确定量DNA,RNA和蛋白质浓度。采用专门研制的荧光染料，只有与样品中的靶分子特异结合时方可发射荧光信号，从而报告靶分子的浓度，因此这种特异性可以使您获得比传统紫外吸光法更加精确的结果。
Qubit4.0荧光定量仪主要特点包括：
强大的双核处理器，5秒内快速准确地定量DNA,RNA和蛋白
较低检测1μL样品（10 pg/μL DNA或12.5μg/mL蛋白）
较多储存1,000 个样品结果，可通过U盘导出或直接与电脑连接
5.7英寸大尺寸彩色触摸屏，直观的导航按钮
个性化设置常规使用的应用，添加新的应用，甚至通过 MyQubit自定义创建新应用
灵活选择操作语言，包括英语，简体中文，法语，西班牙语，德语，意大利语及日语
强大的双核处理器，5秒内快速准确地定量DNA,RNA和蛋白
较低检测1μL样品（10 pg/μL DNA或12.5μg/mL蛋白）
较多储存1,000 个样品结果，可通过U盘导出或直接与电脑连接
5.7英寸大尺寸彩色触摸屏，直观的导航按钮
个性化设置常规使用的应用，添加新的应用，甚至通过 MyQubit自定义创建新应用
灵活选择操作语言，包括英语，简体中文，法语，西班牙语，德语，意大利语及日语
美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计
产品介绍：
快速、灵敏定量DNA、RNA和蛋白质
Invitrogen Qubit 4 荧光计是新一代台式荧光计，能精准测量DNA、RNA和蛋白质浓度。 此外，也可轻松评估RNA的完整性和质量。 简单易用的触摸屏导航，可使您轻松选择和运行实验，而且只需几秒就会显示结果。
Qubit 4荧光计的主要特点包括:
- 比基于紫外吸光度的定量检测更灵敏，是珍贵样品的理想选择
- 准确定量DNA、RNA和蛋白质，每个样品检测时间<3秒。
- 可运行新RNA IQ检测法，快速、可靠地检测降解RNA
- 新集成试剂计算器可报告所需染料和缓冲液的用量
- 较低检测1μL样品
Qubit荧光计工作原理
单个样品检测非常简单
便于使用的荧光计，可快速简单地获得实验结果 大尺寸的彩色触摸屏，可轻松进行各种不同操作。 计算和设置都由仪器自动完成。 Qubit 4荧光计可保存高达1000个样品的数据，数据可由USB数据线或U盘传输。 此外，新的Qubit 4还包含一个内置的试剂计算器，可以轻松确定准备样品和标准所需的染料和缓冲液的量。
适用于Qubit荧光计的试剂盒
用于Qubit荧光计的Qubit试剂盒，配合简单的混合读取模式，均采用相同的操作方式。其中DNA和RNA分析试剂盒仅需孵育2分钟，而蛋白分析试剂盒需要15分钟。 Qubit 4荧光计自动保存您的数据，您可用USB数据线或U盘导出。 除了常规的 dsDNA，寡核苷酸，总RNA，小RNA和蛋白质的分析试剂盒，在 Ion Personal Genome Machine(PGM) 测序仪上进行测序之前，可使用专门的Ion Sphere Quality Control Kit在Qubit 4荧光计上进行Ion Sphere颗粒质量评估。
系统参数
| 仪器尺寸 | 5.4 in (w) x 10 in (l) x 2.2 in (h) (13.6 cm x 25 cm x 5.5 cm) |
| 重量 | 743 g |
| 动态范围 | 5 个数量级 |
| 处理时间 | ≤5秒/样品 |
| 光源 | 蓝光LED（较大470 nm） 红光LED(较大635 nm) |
| 激发光滤光片 | 蓝光 430–495 nm 红光 600–645 nm |
| 发射光滤光片 | 绿光 510–580 nm 红光 665–720 nm |
| 检测器 | 光电二极管:测量能力300-1000 nm |
| 预热时间 | <35 秒 |
| USB驱动 | 4 GB |
The Qubit 4 Flurometer is the latest version of the popular Qubit fluorometer designed to accurately measure DNA, RNA, and protein quantity, and now also RNA integrity and quality, using the highly sensitive Qubit assays. The Qubit 4 Fluorometer was re-engineered to run the Qubit RNA IQ (integrity & quality) assay. The Qubit 4 Fluorometer and RNA IQ Assay Kit work together to accurately distinguish intact from degraded RNA in just two easy steps.
美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计
For all Qubit assays, the concentration or quality of the target molecule in the sample is reported by a fluorescent dye that emits a signal only when bound to the target, which minimizes the effects of contaminants on the result. The easy-to-use touch-screen menus make it easy to select and run the assays you need, with results displayed in just a few seconds.
美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计
美国life Qubit4.0荧光定量仪Q33226，Q33228荧光计
Key features of the Qubit 4 Fluorometer include:
• Fast and highly accurate quantitation of DNA, RNA, and protein in less than three seconds per sample
• Measures intact RNA in less than 5 seconds per sample
• High levels of accuracy using only 1–20 μL of sample, even with very dilute samples
• On-board Reagent Calculator quickly generates Qubit working solution preparation instructions
• Stores results from up to 1000 samples
• Large 5.7-inch, state-of-the-art color touch screen for easy workflow navigation
• Graphical display indicates when samples are in the extended range or out of range
• Small footprint saves space on your bench
• Exports data to a USB drive or directly to your computer via a USB cable
• Ability to personalize your Qubit fluorometer with the assays you run most, add new assays, or even create your own assays with the MyQubit software and web tool
• Language of your choice including English, French, Spanish, Italian, German, simplified Chinese, and Japanese
The Qubit 4 Flurometer can also be used to directly measure the fluorescence of samples using Fluorometer mode. Additionally, Ion Sphere Particle quality can be evaluated on the Qubit 4 Fluorometer using the Ion Sphere Quality Control Kit prior to performing a sequencing run on the Ion PGM sequencer.
Enables more accurate results than with UV absorbance at low concentrations
The Qubit 4 Fluorometer is far more sensitive than UV absorbance, which measures anything absorbing at 260 nm, including DNA, RNA, protein, free nucleotides, or excess salts. Moreover, UV spectrophotometry is often not sensitive enough to accurately measure low concentrations of DNA and RNA. With the Qubit fluorometer, your research is enhanced by more accurate measurements because the dyes in the Qubit assay kits fluoresce only when bound to the selected molecule (DNA, RNA or protein) in your sample. This allows you to avoid repeating work due to inaccurate measurements.
Qubit4.0荧光定量仪Q33226，Q33228荧光计
Fast, simple, and accurate measurement of RNA quality
The Qubit RNA IQ assay provides a fast, simple method to check whether an RNA sample has degraded. The assay utilizes two unique dyes: one that binds to large, intact RNA, and another that selectively binds to small, degraded RNA. Together they enable you to quickly assess the quality and integrity of an RNA sample. To use, simply add your samples to the RNA IQ working solution, then measure on the Qubit 4 Fluorometer.
Save samples and bench space
The thoughtfully designed Qubit 4 Fluorometer requires samples of only 1–20 µL. It is intended for use at room temperature and occupies only a small amount of bench space. The Qubit 4 Fluorometer features advanced optics and data analysis algorithms, and comes equipped with a USB thumb drive and cable for data transfer to Excel™ software and for software downloads, as well as a universal power supply, four plug adapters, and electromagnetic CE certification.
Qubit4.0荧光定量仪Q33228荧光计
Single sample measurements are a breeze
L thin-walled PCR tubes (Cat. No. Q32856) are required.mThis user-friendly fluorometer is combined with quick and simple assay procedures. Calculations and settings are automatically performed by the instrument. The Qubit assays for use with the Qubit 4 Fluorometer are all performed using the same general protocol, which uses a simple mix-and-read format with incubation times of only two minutes for the DNA and RNA assays. 500
Qubit4.0荧光定量仪Q33226，Q33228荧光计
System specifications include:
Instrument dimensions: 5.4"(w) x 10" (l) x 2.2" (h) (13.6 cm x 25 cm x 5.5 cm)
Weight: 743 g
Dynamic range: 5 orders of magnitude
Processing time: ≤seconds/sample
Light sources: blue LED (max ~470 nm), red LED (max ~635 nm)
Excitation filters: blue (430–495 nm), red (600–645 nm)
Emission filters: green (510–580 nm), red (665–720 nm)
Detectors: photodiodes, measurement capability from 300–1,000 nm
Warm-up time: <35 seconds
USB thumb drive: 4 GB
• Fast and highly accurate quantitation of DNA, RNA, and protein in less than three seconds per sample
• Measures intact RNA in less than 5 seconds per sample
• High levels of accuracy using only 1–20 μL of sample, even with very dilute samples
• On-board Reagent Calculator quickly generates Qubit working solution preparation instructions
• Stores results from up to 1000 samples
• Large 5.7-inch, state-of-the-art color touch screen for easy workflow navigation
• Graphical display indicates when samples are in the extended range or out of range
• Small footprint saves space on your bench
• Exports data to a USB drive or directly to your computer via a USB cable
• Ability to personalize your Qubit fluorometer with the assays you run most, add new assays, or even create your own assays with the MyQubit software and web tool
• Language of your choice including English, French, Spanish, Italian, German, simplified Chinese, and Japanese
The Qubit 4 Flurometer can also be used to directly measure the fluorescence of samples using Fluorometer mode. Additionally, Ion Sphere Particle quality can be evaluated on the Qubit 4 Fluorometer using the Ion Sphere Quality Control Kit prior to performing a sequencing run on the Ion PGM sequencer.
Enables more accurate results than with UV absorbance at low concentrations
The Qubit 4 Fluorometer is far more sensitive than UV absorbance, which measures anything absorbing at 260 nm, including DNA, RNA, protein, free nucleotides, or excess salts. Moreover, UV spectrophotometry is often not sensitive enough to accurately measure low concentrations of DNA and RNA. With the Qubit fluorometer, your research is enhanced by more accurate measurements because the dyes in the Qubit assay kits fluoresce only when bound to the selected molecule (DNA, RNA or protein) in your sample. This allows you to avoid repeating work due to inaccurate measurements.
Qubit4.0荧光定量仪Q33226，Q33228荧光计
Fast, simple, and accurate measurement of RNA quality
The Qubit RNA IQ assay provides a fast, simple method to check whether an RNA sample has degraded. The assay utilizes two unique dyes: one that binds to large, intact RNA, and another that selectively binds to small, degraded RNA. Together they enable you to quickly assess the quality and integrity of an RNA sample. To use, simply add your samples to the RNA IQ working solution, then measure on the Qubit 4 Fluorometer.
Save samples and bench space
The thoughtfully designed Qubit 4 Fluorometer requires samples of only 1–20 µL. It is intended for use at room temperature and occupies only a small amount of bench space. The Qubit 4 Fluorometer features advanced optics and data analysis algorithms, and comes equipped with a USB thumb drive and cable for data transfer to Excel™ software and for software downloads, as well as a universal power supply, four plug adapters, and electromagnetic CE certification.
Qubit4.0荧光定量仪Q33228荧光计
Single sample measurements are a breeze
L thin-walled PCR tubes (Cat. No. Q32856) are required.mThis user-friendly fluorometer is combined with quick and simple assay procedures. Calculations and settings are automatically performed by the instrument. The Qubit assays for use with the Qubit 4 Fluorometer are all performed using the same general protocol, which uses a simple mix-and-read format with incubation times of only two minutes for the DNA and RNA assays. 500
Qubit4.0荧光定量仪Q33226，Q33228荧光计
System specifications include:
Instrument dimensions: 5.4"(w) x 10" (l) x 2.2" (h) (13.6 cm x 25 cm x 5.5 cm)
Weight: 743 g
Dynamic range: 5 orders of magnitude
Processing time: ≤seconds/sample
Light sources: blue LED (max ~470 nm), red LED (max ~635 nm)
Excitation filters: blue (430–495 nm), red (600–645 nm)
Emission filters: green (510–580 nm), red (665–720 nm)
Detectors: photodiodes, measurement capability from 300–1,000 nm
Warm-up time: <35 seconds
USB thumb drive: 4 GB
